Phase-1_RDO_top.pdf - Top Level Phase-1 RDO context diagram. (04/17/2008)
Phase-1_RDO_ladder.pdf - Ladder context diagram. (04/17/2008)
Phase-1_RDO_massterm.pdf - Mass termination board context diagram. (04/17/2008)
Phase-1_RDO_v5motherboard.pdf - Virtex-5 interface motherboard context diagram. (04/17/2008)
Phase-1_RDO_firmware_requirements.pdf - Phase-1 RDO firmware requirements in a terse form. (04/17/2008)
Pixel_phase1_rdo_firmware_modules.pdf - Phase-1 RDO firmware modules diagram. (04/17/2008)
Mimosa22_v1_Doc.pdf - Mimosa-22e manual. (04/17/2008)
m22_phase1_ultimate_sensor_testing.pdf - A preliminary sensor testing plan for Mimosa-22e, Phase-1 and Ultimate. (04/21/2008)
Ultimate_production_testing_revised.pdf - A draft sensor testing plan for Ultimate proposing a special testing mode to allow for testing with SUZE. (05/06/2008)
Phase_1_v5_int.zip - A zip file containing preliminary orcad schematics for the Virtex-5 interface board for the Phase-1 and Ultimate readout system and the excel database of pins and net names for the Virtex-5. (06/03/2008)
PIXEL_RDO_mass_term_060308.zip - A zip file containing preliminary orcad schematics for the Phase-1 and Ultimate readout Mass termination board. (06/03/2008)
Pixel_RDO_main_V5_int_motherboard.pdf - A pdf of the orcad schematics for the Virtex-5 interface board for the Phase-1 and Ultimate readout system. (07/01/2008)
PIXEL_RDO_MASS_TERM_V1.pdf - A pdf of the orcad schematics for the Phase-1 and Ultimate readout Mass termination board. (07/01/2008)
PIXEL_RDO_BOARD_FILES_LG.zip - A zip file containing orcad schematic / layout files and gerber board files for the Virtex-5 interface board for the Phase-1 and Ultimate readout system and the excel database of pins and net names for the Virtex-5. (07/01/2008)
PIXEL_RDO_MASS_TERM_v1.0.zip - A zip file containing orcad schematic / layout files and gerber board files for the Phase-1 and Ultimate readout Mass termination board. (07/01/2008)
PH1-UserMan-20080724.pdf - Preliminary documentation for the Phase-1 sensor. (09/15/2008)
PIXEL_RDO_MASS_TERM_v1.1.zip - A zip file containing orcad schematic / layout files and gerber board files for the Phase-1 and Ultimate readout Mass termination board. (09/16/2008)
PIXEL_RDO_MASS_TERM_V1.1.pdf - A pdf of the orcad schematics for the Phase-1 and Ultimate readout Mass termination board.
PIXEL_RDO_BOARD_FILES_LG.zip - A zip file containing orcad schematic / layout files and gerber board files for the Virtex-5 interface board for the Phase-1 and Ultimate readout system and the excel database of pins and net names for the Virtex-5. (07/01/2008)
PH1-UserMan-20080916.pdf - Updated documentation for the Phase-1 sensor. (09/29/2008)
Phase-1_individual_test_board_patched_1.pdf - Schematic for the individual testing board for the Phase-1 sensor. (04/24/2009)
PHASE1_INDIVIDUAL_TEST_PATCHED_1.DSN - Schematic for the individual testing board for the Phase-1 sensor in Orcad format.(04/24/2009)
SE_DRIVERS_PHOTOGATE_LU_COMBO.DSN - Schematic for the SE drivers ad-on board for the individual testing board for the Phase-1 sensor in Orcad format. This design also contains boards for the latch up tests and the Photogate testing.(04/24/2009)
mimosa22_ms3_phase1_interface.pdf - Schematic for the interface board for testing the Mimosa-22, Mimostar-3 and Phase-1 sensors. (10/15/2008)
MIMOSA22_INT_LG.DSN - Schematic for the interface board for testing the Mimosa-22, Mimostar-3 and Phase-1 sensors in Orcad format. (10/15/2008)
Phase-1_and_Ultimate_power_consumption.doc - Calculation of wire sizes required for powering ladders of Phase-1 and Ultimate sensors. (10/22/2008)
LBNL_Phase1_test_board.zip - A zip file containing orcad layout files and gerber board files for the Phase-1 individual testing board. (12/19/2008)
phase1_testing_plan_2009_01_18.doc - A doc file with a preliminary testing plan for the Phase-1 sensor. (01/22/2009)
bonding_diagram_individual_test.pdf - A bonding diagram for the individual testing board for the Phase-1 sensor. (01/22/2009)
Pad4bonding_modified.doc - A doc file listing the pads of the Phase-1 sensor that are required to be bonded for proper sensor function. This document has been modified from the IPHC version to give the actual physical pad numbes and descriptions. (04/14/2009)
Probe_Testing_Phase1.pdf - A pdf file describing the probe testing system design and testing that is planned for the Phase-1 sensor. (04/30/2009)
cable_power_gnd_trace_optimization.doc - A .doc file describing the optimizations done as the groundwork to designing a possible Phase-1 10 sensor cable with only 2 layers in the low mass region. (05/04/2009)
M26_UserManual.pdf - The Mimosa-26 user manual. Most functions should be the same as the Ultimate sensor. (06/22/2009)
Phase1_test_summary(bias,capas).pdf - Summary of selected Phase-1 tests (second batch of sensors, performance at different power supply voltages, performance with reduced number of decoupling capacitors). (08/10/2009)
Development_PXL_flex_cable.doc - A word document giving the development plan for the flex readout cable. (09/14/2009)
SCHEMATIC1 _ PH1_infrastructure_test_board.pdf - Schematic for the Phase-1 infrastructure testing board. (09/17/2009)
PHASE-1_INFRASTRUCTURE_TEST.DSN - Schematic for the Phase-1 infrastructure testing board in Orcad format.(09/17/2009)
Phase1-2_tests_Nov2009_summary.pdf (doc) - A short report on Phase-1 and Phase-2 tests performed at IPHC in Nov. 2009. (05/02/2010)
PIXEL_hardware_meeting_2010_02_11.ppt - A .ppt presentation describing the parameters of interest and cable prototype design options for the PXL RDO flex cable.(02/11/2010)
Phase_2_thinned_yield_initial.pdf - A document giving the initial yield for Phase-2 sensors thinned with the scribe and backthin method of wafer processing.. (07/15/2010)
programming_and_sync_issues-update.doc - A document giving an update on issues and solutions related to JTAG programming and Pahse-1/2 synchronization in the ITB tests.(07/27/2010)
SCHEMATIC1_PH1_infrastructure_test_board_patched.pdf - Schematic for the Phase-1 infrastructure testing board with patches. (07/27/2010)
ITB_test_progress_report.ppt - Short presentation on noise performance of ITB sensors as a function of the sensors discriminator activity.(03/03/2011)
ITB_test_results_v2.pdf (doc) - Summary of ITB (ladder1) test results.(07/07/2011)
Probe_Testing_Phase1.pdf - A pdf file describing the probe testing system design and testing that is planned for the Phase-1 sensor. (04/30/2009)
probe_card_phase_1-070909.zip - A zip file containing the orcad format schematic and layout files for the Phase-1 sensor probe card. (09/24/2009)
Phase_1_probe_card.pdf - A pdf file containing the schematic for the Phase-1 sensor probe card. (09/24/2009)
bonding_large_for_rhonda.pdf - A pdf file containing the bonding diagram forbonding a Phase-1 sensor onto the probe card. (09/24/2009)
sensor_tracking_proposal.doc - A doc file containing a proposal for a method to do sensor tracking. (02/05/2010)
Phase_1_probe_card_patched.pdf - A pdf file containing the schematic for the Phase-1 sensor probe card including all patches that had to be added to the card. (04/16/2010)
PROBE_CARD_PHASE_1-070909_patched.DSN - An Orcad-Capture file containing the schematic for the Phase-1 sensor probe card including all patches that had to be added to the card. (04/16/2010)
Phase-1_rdo_part_list.doc - Word document with parts listed and data sheet links. (04/15/2008)
TB3R1 - TI Quad Differential PECL Receiver.
TB5D1 - TI Quad Differential PECL Driver.
SN65LVDT14,SN65LVDT41 - TI Memory Stick Interconnect Extender Chipset with LVDS.
SurveyReticule_ires.pdf - The survey fiducial marker used in Phase-1 and (?) Mimostar-3. (11/21/2008)
phase1_fiduciallocations.ppt - A ppt file showing the locations of the survey fiducial markers on Phase-1. (11/21/2008)
Wafer_Map_12211-1.xls - A excel file showing the wafer map for Phase-1. (01/14/2009)
heater_test_cable.pdf - A pdf file showing the schematic for the heater test cable for the Pixel full mockup cooling test. (07/18/2009)
thermal_test_distribution_and_readout_board.pdf - A pdf file showing the schematic for the power distribution and NTC thermal sensor readout PCB for the Pixel full mockup cooling test. (07/18/2009)
flatness_of_120um_sensors.doc - Document describing the results of flatness checks of Phase-1 sensors thinned to 120 microns. (08/03/2009)
PH1_bonding_diagram_individual_test_telescope.pdf - A pdf file showing the modified bonding diagram for the Pixel telescope PCBs. (07/25/2009)
Phase-1_telescope_proposal.pdf - A pdf file proposing a Pixel telescope fabricated from existing PCBs and hardware along with a test plan. (07/29/2009)
Phase2_telescope_wiring.pdf (Orcad .DSN)- Prototype wiring used for Phase-2 telescope tests at LBL. (11/02/2010)