HFT Schematics Page


For the HFT RDO System, click HERE

pixel_daq_motherboard.pdf - Pixel DAQ motherboard schematic.

mezz2-1.pdf - Mezzanine card 2-1 schematic.

mezz2-2.pdf - Mezzanine card 2-2 schematic.

mezz2-2_patched.pdf - Mezzanine card 2-2patched schematic.

MEZZ2-3_UPDATED_SCHEMATIC1 _ PAGE1.pdf - Mezzanine card 2-3 schematic updated to show what is patched on the board. Use for MIMOSA5.

mezz2-4.pdf - Mezzanine card 2-4 schematic.

mezz_LG_UCI_MEZZ_T49M.pdf - Mezzanine card for APS-4 schematic.

aps_5_sch.pdf - Mezzanine card for APS-5 schematic.

mimostar2_mezz_patched.pdf - Mezzanine card for Mimostar2 schematic.

CABLE_SCHEMATIC1 _ PAGE1.pdf - Schematic page 1 for the ladder cable

CABLE_SCHEMATIC1 _ PAGE2.pdf - Schematic page 2 for the ladder cable

CABLE_SCHEMATIC1 _ PAGE3.pdf - Schematic page 3 for the ladder cable

CABLE_SCHEMATIC1 _ PAGE4.pdf - Schematic page 4 for the ladder cable

CABLE_SCHEMATIC1 _ PAGE5.pdf - Schematic page 5 for the ladder cable

ladder_to_rdo_adapter_board.pdf - Schematic for the prototype ladder to existing motherboard readout adapter board.

hft-daughterboard.pdf - Schematic of the HFT daughterboard prototype

hft_motherboard_2.pdf - Schematic of the HFT motherboard prototype - NOTE - patches are on the board NOT updated on the schematic. A new board is in design.

Mimostar3_test_board.pdf - Test boardfor Mimostar3 schematic.

mix3L_schema.pdf - IPHC Mimostar3 test board schematic.

Firmware


MIMOSA5 firmware (right click and "save as")

512rg4m4d522p0x512x512.mcs - HW MIMOSA5 read firmware with triggers.

512rg4m4d522p2x512x512.mcs - HW MIMOSA5 read firmware with triggers.

512rg4m4d522p3x512x512.mcs - HW MIMOSA5 read firmware with triggers.

512rg4m4d522p512x512.mcs - HW MIMOSA5 read firmware with triggers.

ScopeTrigInfo.pdf - Documentation for above firmware.

mimosa5_55.mcs - mimosa5_55.mcs firmware.

mim5_als5g.mcs - mim5_als5g.mcs firmware used at the ALS run.

Exerpt from MEMOSA5OpertionLog.doc - HW MIMOSA5 operation log excerpt.

MEMOSA5OperationLog.doc - HW MIMOSA5 operation log.

APS-4 firmware (right click and "save as")

aps4_11.mcs - aps4_11.mcs firmware.

MIMOSA5 documentation


MIMOSA5_sector_jumper_locations.pdf - MIMOSA5 sector labeling and jumper locations for use with HW FPGA software available above.

Mim5Interface-Rev1.pdf - Interface to the MIMOSA5 chip pads and numbering scheme.

mimosa5_schem.pdf - Schematic of the MIMOSA5 chip from Duptech.

APS-4 documentation


Mar2905_Neko3_PD_Area_Documentation.pdf - Manual for the APS-4 chip

APS-5 documentation


aps-5_bonding_diagram.pdf - bonding diagram for the APS-5 Chip

Documentation_vs2.pdf - Manual for the APS-5 chip

MIMOSTAR documentation


MimoStar1_v1.0.pdf - Manual for the MIMOSTAR 1 chip.

MimoStar2_v1.0.pdf - Manual for the MIMOSTAR 2 chip version 1.0.

MimoStar3.pdf - Manual for the MIMOSTAR 3 chip.

MimoStar2_1_1.pdf - Manual for the MIMOSTAR 2 chip version 1.1.

mimostar2_mezz_3.pdf - A preliminary schematic for a mezzanine card for MIMOSTAR2.

mimostar2_cable.pdf - A preliminary schematic for a cable for a ladder of MIMOSTAR2 detectors.

mimostar_pcb2.pdf - Schematic for the IRES MIMOSTAR 2 RDO PCB.

MIMOSTAR_PCB2_TEST_REPORT_060116.pdf - Test procedure and report for the MIMOSTAR 2 chip on the mimostar pcb2.

MIMOSTAR_PROTO_TEST_BOARD_V2_JTAG_PC_PORT__PARALLEL_060110.pdf - Manual for making a JTAG serial cable to interface to the MIMOSTAR 2.

MIMOSTAR_PROTO_TEST_BOARD_V2_JTAG_SW_INSTALLATION_NOTES_060113.pdf - Manual for the JTAG control software for the MIMOSTAR 2.

MIMOSTAR_PROTO_TEST_BOARD_V2_USER_MANUAL_060116.pdf - User Manual for the MIMOSTAR 2 proto test board.

mimostar2_cable_prelim.pdf - A preliminary schematic for a cable for a ladder of MIMOSTAR2 detectors.

mimostar2_mb_prelim.pdf - A preliminary schematic for the motherboard to connect a daughter card to a STRATIX development board and ladder of MIMOSTAR2 detectors.