04/20/2005

LG

Status and Location of MIMOSA5 Detectors for HFT

We have received 3 wafers of MIMOSA5 detectors. The following describes the status and location of each detector. This will be updated as needed.

The following table shows the status and location.

updated 04/20/2005
MIMOSA Wafer #	Chip #	color	thinned?	thinned status	diced	diced status	location
B35739_09_G6	1	R	9/8/2004	broken
	2	R	9/8/2004	broken
	3	R	9/8/2004	broken
	4	Y	9/8/2004	ok	9/10/2004	ok
	5	Y	9/8/2004	broken
	6	Y	9/8/2004	broken
	7	R	9/8/2004	broken
	8	R	9/8/2004	broken
	9	Y	9/8/2004	scratched	9/10/2004	ok
	10	R	9/8/2004	broken
	11	Y	9/8/2004	broken
	12	Y	9/8/2004	broken
	13	Y	9/8/2004	broken
	14	R	9/8/2004	ok	9/10/2004	ok	glue to mech prototype
	15	Y	9/8/2004	ok	9/10/2004	ok
	16	R	9/8/2004	broken
	17	G	9/8/2004	broken
	18	R	9/8/2004	broken
	19	G	9/8/2004	broken
	20	R	9/8/2004	broken
	21	R	9/8/2004	scratched	9/10/2004	ok	glue to mech prototype
	22	R	9/8/2004	broken
	23	G	9/8/2004	broken
	24	G	9/8/2004	broken
	25	G	9/8/2004	broken
	26	R	9/8/2004	scratched	9/10/2004	ok	glue to mech prototype
	27	Y	9/8/2004	broken
	28	Y	9/8/2004	broken
	29	Y	9/8/2004	broken
	30	R	9/8/2004	ok	9/10/2004	ok	glue to mech prototype
	31	Y	9/8/2004	broken
	32	Y	9/8/2004	broken
	33	Y	9/8/2004	broken
B35739_12_B6	1	R	12/22/2004	scratch, chipped	10/4/2004	ok
	2	Y	12/22/2004	chipped corner	10/4/2004	ok	glued to prototype ladder. Position #3
	3	R	10/12/2004	ok	10/4/2004	ok	glue to mech prototype #2
	4	G	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #2
	5	Y	12/22/2004	ok	10/4/2004	ok	glued to mezzanine card # 2, tested 12/08/2004,some response, sector 1 dead
	6	Y	12/22/2004	ok	10/4/2004	ok	glued to mezzanine card # 3, tested 12/08/2004,all sectors alive but sector 3 weak
	7	R	10/12/2004	ok	10/4/2004	ok	glue to mech prototype #2
	8	R	10/12/2004	ok	10/4/2004	ok	glue to mech prototype #2
	9	G	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #1, broken during assembly
	10	G	12/22/2004	surface scratch	10/4/2004	ok	glued to prototype ladder. Position #6
	11	Y	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #8
	12	Y	10/12/2004	ok	10/4/2004	ok	film adhesive to mezzanine card # 5
	13	Y	10/12/2004	ok	10/4/2004	ok	film adhesive to mezzanine card # 6
	14	Y	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #7
	15	R	12/22/2004	ok	10/4/2004	ok
	16	Y	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #9
	17	R	12/22/2004	ok	10/4/2004	ok
	18	Y	10/12/2004	ok	10/4/2004	ok	glued to prototype ladder #2 position #10
	19	Y	10/12/2004	ok	10/4/2004	ok	broken - gluing to 2nd prototype ladder
	20	R	10/12/2004	ok	10/4/2004	ok
	21	Y	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #4
	22	G	12/22/2004	chipped corner	10/4/2004	ok	glued to prototype ladder #2 position #8
	23	R	12/22/2004	broken	10/4/2004	ok	broken during thinning
	24	G	10/12/2004	ok	10/4/2004	ok	glued to mezzanine card # 4, tested 12/08/2004, draws 2.5A something wrong, Si chipped
	25	Y	10/12/2004	ok	10/4/2004	ok	glued to prototype ladder #2 position #5
	26	R	12/22/2004	ok	10/4/2004	ok
	27	R	12/22/2004	chipped corner	10/4/2004	ok
	28	R	10/12/2004	ok	10/4/2004	ok	glue to mech prototype #2
	29	R	10/12/2004	ok	10/4/2004	ok
	30	R	10/12/2004	ok	10/4/2004	ok
	31	Y	12/22/2004	ok	10/4/2004	ok	glued to prototype ladder. Position #5, broken during assembly
	32	R	10/12/2004	ok	10/4/2004	ok
	33	Y	10/12/2004	ok	10/4/2004	ok	glued to prototype ladder #3 position #10
B35739_L5_B4	1	Y			4/20/2005
	2	Y			4/20/2005
	3	G			4/20/2005
	4	R			4/20/2005
	5	G			4/20/2005
	6	Y			4/20/2005
	7	R			4/20/2005
	8	G			4/20/2005
	9	R			4/20/2005
	10	Y			4/20/2005
	11	G			4/20/2005
	12	R			4/20/2005
	13	G			4/20/2005
	14	Y			4/20/2005
	15	Y			4/20/2005
	16	R			4/20/2005
	17	R			4/20/2005
	18	G			4/20/2005
	19	G			4/20/2005
	20	G			4/20/2005
	21	Y			4/20/2005
	22	Y			4/20/2005
	23	G			4/20/2005
	24	Y			4/20/2005
	25	R			4/20/2005
	26	R			4/20/2005
	27	R			4/20/2005
	28	G			4/20/2005
	29	G			4/20/2005
	30	R			4/20/2005
	31	R			4/20/2005
	32	R			4/20/2005
	33	R			4/20/2005